Ward Planning Secretary Previous Papers – Part B Questions with Answers

AP Government has conducted ward planning and regulation secretary exams in 2019. Following are questions with answers from the 2019 question paper. The new notification 2020 also mentions same syllabus and exam pattern for ward planning secretary jobs. These questions are useful for the candidates appearing for ward sachivalayam – planning and regulation secretary exams in 2020.

What is the full form of BOD used commonly to judge water quality?

  1. Biochemical Oxygen Demand
  2. Biophysical Oxygen Demand
  3. Bio Oxygen Demand
  4. Biotoxic Oxygen Demand
    ANSWER: 1

The fundamental right pertaining to land and property ownership does not include

  1. sale and lease
  2. change of use
  3. mortgage
  4. grant easement
    ANSWER: 2

The water consumption of a high rise apartment building with 60 dwelling units have an average household size of 5 persons is 135 lped. Assuming 8 % of the total use is met with recycled water supply, the daily domestic demand for the building is ……. litres.

  1. 8100 L
  2. 9100 L
  3. 7100 L
  4. 6100 L
    ANSWER: 1

Housing for all Plan of Action is a planning document related to which of the following government schemes?

  1. NULM
  2. PMAY
  3. National Rurban Mission (NRuM)
  4. AMRUT
    ANSWER: 2

In the critical path method (CPM) for time scheduling, forward pass calculation is carried out for determining

  1. late start and early finish time
  2. early start and early finish time
  3. late start and late finish time
  4. early start and late finish time
    ANSWER: 2

Which of the following is not a part of solid waste management?

  1. incineration
  2. sanitary landfill
  3. flocculation
  4. pyrolysis
    ANSWER: 3

In GIS, information of DEM gives details on

  1. vegetation cover
  2. soil type
  3. water table
  4. typography
    ANSWER: 4

Ramsar sites refer to

  1. archeological sites for conservation
  2. reserve forests
  3. glacier sites under threat
  4. wetlands of significance
    ANSWER: 4

Water conservation in steep typography can be done effectively by

  1. check dam
  2. contouring
  3. strip cropping
  4. terracing
    ANSWER: 2

Filtration beds in rain water harvesting are arranged from top to bottom in the order of

  1. gravel, sand, pebble
  2. sand, gravel, pebble
  3. pebble, gravel, sand
  4. sand, gravel, sand
    ANSWER: 2

The intrusion of salty groundwater in any area is caused due to

  1. lowering of water table
  2. raising of the water table
  3. application of irrigation water
  4. rain water flooding
    ANSWER: 1

percolcation tanks are used for

  1. storage of water to be used for irrigation and domestic purpose
  2. to increase the water carrying capacity of stream
  3. to hold the surface water for recharge
  4. flood control
    ANSWER: 3

Water detention areas are used primarily

  1. to create swimming and recreation areas
  2. to provide aesthetically pleasing vistas
  3. to contral surface water runoff
  4. to act as reservoirs in periods of drought
    ANSWER: 3

Chipko Andolan is concerned with

  1. conservation of natural resources
  2. development of new breeds of forest plants
  3. zoological survey of India
  4. forest conservation
    ANSWER: 1

The process of stripping existing vegetation from a site can cause

  1. pollution
  2. disorientation
  3. defoliation
  4. erosion
    ANSWER: 4

Landfill reclamation is the process of transforming

  1. riverbed to landfills
  2. wasteland to woodland
  3. wetlands to cultivation lands
  4. none of the above
    ANSWER: 1

The process of replanting the native (same) species which existed on the site before disturbing, is termed as

  1. reclamation
  2. restoration
  3. revegetation
  4. topiary
    ANSWER: 3

Arcology – ecologically sound architecture used to create self sustaining habitats is the vision of

  1. Le Corbusier
  2. Paolo Soleri
  3. Louis Kahn
  4. Soria Y Mata
    ANSWER: 2

Exotic plants that crowd out native plants and reduce biodiversity are termed as

  1. invasive plants
  2. cultivars
  3. hybrids
  4. adapted plants
    ANSWER: 1

The compressive strength of M-25 concrete is

  1. 25 kg/sq.m
  2. 25 N/sq.m
  3. 250 N/sq.mm
  4. 2.5 N/sq.mm
    ANSWER: 2

Which of the following processes is not used for corrosion resistance of cast iron?

  1. painting
  2. epoxy coating
  3. quenching
  4. galvanising
    ANSWER: 3

More questions – Ward Planning Secretary previous papers

……………… convert light into electricity using semiconductor materials.

  1. windmills
  2. wind turbines
  3. thermodynamic boilers
  4. photovoltaic cells
    ANSWER: 4

The most essential information required while designing a home with a passive solar heating system is

  1. climate zone of the project
  2. orientation of the site of the sun
  3. area of glazing required to achieve desired temparatures
  4. quantity of thermal mass needed to store solar heat
    ANSWER: 2

TERI stands for

  1. The Engineering Research Institute
  2. The Energy and Resources Institute
  3. The Energy and Research Institute
  4. The Energy Renewable Institute
    ANSWER: 2

The colour code used for industrial land use classification is

  1. red
  2. purple
  3. blue
  4. yellow
    ANSWER: 2

The minimum required width of footpath in high density commercial land use as per NBC is

  1. 1.8 m
  2. 2.5 m
  3. 4.0 m
  4. 4.5 m
    ANSWER: 3

Easements are generally placed on private property to accommodate

  1. daylight
  2. landscaping
  3. access
  4. setbacks
    ANSWER: 3

ArchiCAD, Autodesk Revit, Digital Project Desiner (CATIA) and Vectorworks Architect are examples of

  1. statistical analysis software
  2. GIS software
  3. BIM software
  4. Image processing software
    ANSWER: 3

The components measuring Human Development Index (HDI) of a nation are

  1. life expectancy, education and per capita income
  2. life exectancy, economy and housing
  3. health, development and per capita income
  4. housing, health and hygiene
    ANSWER: 1

A level line is

  1. horizontal line
  2. line passing through the center of cross hairs and the centre of eyepiece
  3. line parallel to the mean spheroidal surface of earth
  4. line passing through the objective lens and the eyepieceof a dumpy or tilting level
    ANSWER: 3

Which instrument is used to sight an object?

  1. compass
  2. U-frame
  3. plumbing fork
  4. alidate
    ANSWER: 4

The cross hairs in the surveying telescope are placed

  1. midway between eyepiece and objective lens
  2. much closed to the eyepiece than to the objective lens
  3. much closer to the objective lens than to the eyepiece
  4. anywhere between eyepiece and objective lens
    ANSWER: 2

A series of closely spaced contour lines represent a

  1. steep slope
  2. gentle slope
  3. uniform slope
  4. plane slope
    ANSWER: 1

Which of the following methods of theodolite traversing is suitable for locating the details which are far away from transit stations?

  1. measuring angle and distance from one transit station
  2. measuring angles to the point from at least two stations
  3. measuring angle at one station and distance from other
  4. measuring distance from two points on traverse line
    ANSWER: 2

The following method/s is/are used to find the true length and true inclination of a line when its front view and top view are given

  1. rotation method
  2. trapezoidal method
  3. auxiliary plane method
  4. all of the above
    ANSWER: 4
Grama Sachivalayam Previous Question Papers and Free Model Exams

Hatching lines are drawn at ……. degrees to reference lines

  1. 30
  2. 45
  3. 60
  4. 90
    ANSWER: 2

The length : widthin in case of an arrowhead is

  1. 1:1
  2. 2:1
  3. 3:1
  4. 4:1
    ANSWER: 3

AP Sachivalayam Exams – Ward Planning and Regulation Secretary Previous Questions

Following are some of the questions asked in AP Ward planning and regulation secretary exam held in September 2019. The previous questions with answers are given for those candidates appearing for ward planning secretary exams in 2020. We have online exams / mock tests with thousands of questions and answers. The questions are useful for the ward planning and regulation secretary exams 2020 and later recruitments.

Gunter’s chain consists of ….. links

  1. 500
  2. 50
  3. 1000
  4. 100
    ANSWER: 4

Sag correction is always

  1. positive
  2. negative
  3. zero
  4. none of the above
    ANSWER: 2
Ward Planning and Regulation Secretary Model Papers

The fixed point whose elevation is known, is called

  1. benchmark
  2. change point
  3. reduced level
  4. station
    ANSWER: 1

In a hilly terrain, staff reading is more at

  1. lower point
  2. higher point
  3. first point
  4. last point
    ANSWER: 1

Theodolite is an instrument used for measurement of

  1. distance only
  2. horizontal angles only
  3. vertical angles only
  4. both horizontal and vertical angles
    ANSWER: 4

A full scale technical drawing will have a scale factor of

  1. 1:1
  2. 1:2
  3. 2:1
  4. 1:4
    ANSWER: 1

What is the length and breadth ratio of letters in engineering drawing?

  1. 2:3
  2. 1:2
  3. 7:5
  4. 7:4
    ANSWER: 4

Digital land surveying is conducted in sequence of

  1. establishment of control point, collection of field details, automated mapping
  2. collection of field details, establishment of control point, automated mapping
  3. Establishment of control point, automated mapping, collection of field details
  4. automated mapping, collection of field details, establishment of control point
    ANSWER: 1
Grama Sachivalayam Previous Question Papers and Free Model Exams

The length of a chain is measured from

  1. Centre of one handle to centre of other handle
  2. Outside of one handle to outside of other handle
  3. Outside of one handle to inside of other handle
  4. inside of one handle to inside of other handle
    ANSWER: 2

Angle of dip is

  1. vertical angle with respect to horizontal angle
  2. horizontal angle with respect of vertical angle
  3. vertical angle with respect to magnetic flux direction
  4. none of the above
    ANSWER: 1

Local attraction in compass surveying may exist due to

  1. incorrect levelling of the magnetic needle
  2. loss of magnetism of the needle
  3. friction of the needle at the pivot
  4. presence of magnetic substances near the instrument
    ANSWER: 4

Reciprocal levelling is used when

  1. terrain is flat
  2. there are obstacles
  3. benchmark is not visible
  4. highway is under construction
    ANSWER: 2

Which of the following methods of contouring is most suitable for hilly terrain?

  1. direct method
  2. square method
  3. cross section method
  4. tacheometric method
    ANSWER: 4

The side view of an object is drawn in

  1. vertical plane
  2. horizontal plane
  3. profile plane
  4. any of the above
    ANSWER: 3

If an object is situated below HP and behind the VP, the quadrant is

  1. 1st quadrant
  2. 2nd quadrant
  3. 3rd quadrant
  4. 4th quadrant
    ANSWER: 3

Accurate measurement of distance is made with

  1. chain
  2. invar tape
  3. metallic tape
  4. steel tape
    ANSWER: 2
APPSC Free Online Exams

The main principle of surveying is to work

  1. from part to the whole
  2. from whole to the part
  3. from higher level to lower level
  4. from lower level to higher level
    ANSWER: 2

AMRUT, the new scheme launched by the Government of India, stands for

  1. Atal Mission of Rejuvenation and Urban Transformation
  2. Atal Mission for Renewal of Urban Transportation
  3. Atal Mission for Redevelopment of Urban Transportation
  4. Atal Mission for Renewal and Urban Transformation
    ANSWER: 1

Development authorities in India are established under the provision of the

  1. Municipal Act
  2. 74th Constitutional Amendment Act
  3. Town and Country Planning Act
  4. Land Acquisition Act
    ANSWER: 3

As per the Ancient Monuments and Archaeological Sites and Remains Act 2010, the extent of prohibited area beyong the demarcated protected area in meters is

  1. 50
  2. 100
  3. 250
  4. 500
    ANSWER: 2
error: Content is protected !!